Baby diapers making machine Problems that should be paid attention to in use

Author:Haina Machinery Factory FROM:Diaper Machinery Manufacturer TIME:2023-04-13

Maintaining the stable and orderly operation of the baby diapers making machine electrical system is the basis and premise for the efficient operation of machinery manufacturing. In order to effectively reduce the failure rate of the electrical system, it is very important to do daily maintenance and maintenance. In actual production, the maintenance of baby diapers making equipment electrical systems is mainly carried out by maintaining component wear and electrical components damage.

 Baby diapers making machine

1.Baby diapers making machine Use environment

In order to improve the service life of baby diapers making machine, it is generally required to avoid direct sunlight and other heat radiation, and avoid places with humidity, dust or corrosive gas. Precise equipment should be kept away from equipment with large vibrations. Good power supply guarantee In order to avoid the influence of large fluctuation of power supply (greater than ±10%) and possible instantaneous interference signals, equipment is generally powered by a dedicated line (such as a separate channel from the low-voltage power distribution room for the machine to use) or a voltage stabilizer is added. etc., can reduce the influence of power supply quality and electrical interference.


2. Improve the quality of baby diapers making machine operators

The use of baby diapers making machine is more difficult than ordinary equipment, because the machine is a typical mechatronic product, and it involves a wide range of knowledge, that is, the operator should have a broader professional knowledge of machinery, electricity, hydraulics, gas, etc.; , Due to the rapid upgrade and replacement of its electrical control system, if you do not regularly participate in professional theoretical training and study, you will not be able to master the new system application, so the quality requirements for operators are very high. Therefore, it is necessary to train the equipment operators so that they can learn more systematically about the principle, performance, lubrication parts and operation methods of the equipment, so as to lay the foundation for better use of the equipment. At the same time, in the use and management of the machine, a series of maintenance and use measures are formulated.

 Baby diapers making equipment

3. Formulate baby diapers making machine operating procedures

In terms of the use and management of baby diapers making machine, a series of practical and effective operating procedures should be formulated. Such as lubrication, maintenance, rational use and standardized shift system, etc., are the main contents of equipment use and management. Formulating and complying with operating procedures is one of the important measures to ensure the safe operation of the machine. Practice has proved that many failures can be reduced by following the operating procedures.


4.Baby diapers making machine Use failure

Treat baby diapers making machine faults calmly and not blindly. There will inevitably be some faults in the use of the equipment. At this time, the operator should treat it calmly and not blindly, so as to avoid more serious consequences. Pay attention to keeping the scene, and wait for the maintenance personnel to truthfully explain the situation before and after the fault, and Participate in joint problem analysis and early troubleshooting. If the fault is due to the operation, the operator should learn from the experience in time to avoid making the same mistake next time.

 Baby diapers production line

After purchasing baby diapers making machine, you should make full use of it. The newly purchased machine should be put into use as soon as possible. The failure rate of the equipment in the early stage of use is relatively large. The user should make full use of the equipment during the warranty period to expose its weak links as soon as possible. resolved within the period. During processing, the opening and closing of the main shaft of the machine should be minimized to reduce the wear on clutches, gears and other components.

Start Customizing Your Machines Now!
Contact US
Manufacturer Address:Wuli Industrial Zone, Jinjiang City,Fujian Province,China
Sale Tel: +86-13599937366
MP/Whatapp: +86-13599937366


About Us